Tampilkan postingan dengan label Paul Smith PS. Tampilkan semua postingan
Tampilkan postingan dengan label Paul Smith PS. Tampilkan semua postingan

Sabtu, 27 Februari 2010

Paul Smith modifications - a review

As the proud owner of one of Steve Ricks’ famous Tennant Coats, it was only a matter of time and money before I commissioned him again. This time though, it was the Matt Smith look I was working on.


A bit of background: when those pictures were published of that Southerndown beach shoot in July last year, a lot was made of the tweed and bow tie. However, for me, the two most striking elements of the costume were the boots (oh those elusive All Saints...) and the shirt; such a strange but stylish pattern, when combined with the bow tie and tweed gives a strangely modern but retro look at the same time. In fact, when I first snapped eyes on the shirt I thought ‘old-man’s shirt’ - kind of knackered, charity shop style. It wasn't until you venture up close and see that design that you realise there is more than meets the eye.

My good friends on Gallifrey Base went into costume over drive and we soon worked out the various brands: All Saints boots, Topman trousers, Harris Tweed jacket and... a Paul Smith shirt. Yes PS by Paul Smith to be precise, but I was surprised.

I checked out the John Anthony website and they were selling the burgundy shirt, but only had S, M and XXL. Now if I knew what I know now about the sizing, I would've snapped up the XXL there and then, however I decided that at £55, I wanted a good fit. So I noticed an alternate colour, navy blue and grabbed an XL and was disappointed to find it was very very snug. Now I don’t consider myself a particularly large chap, but I was making this thing bulge out in a not too attractive manner! So, in the wardrobe it went for a while.

When subsequent filming shots of Matt Smith were released from Croatia (I think), he was sporting that navy shirt (he had been in burgundy up until then). I was immediately fired up to get this shirt of mine wearable. Enter Steven Ricks.

So impressed was I by his customer service and top quality work, I asked him whether he could mod my blue shirt in the MS style - the factory shirts come with little blue sleeve straps to tie the rolled sleeves back. These are removed and stitched onto the edge of the cuff to create a distinctive finish. Also, the buttons are covered by fabric on the PS shirt but not on the Doctor’s.

Steve told me to send the shirt to him so he could examine the pattern so he could prepare a reproduction and while it was in his possession, he would perform the mods. Not only that, but he said that he could also provide me with more breathing space by letting it out at the back.

When the shirt returned to me a few weeks later, it was as you will see it on screen. Finished beautifully, the cuffs are brilliant now and the buttons are visible (on a button stand I believe - am not particularly well versed in tailoring parlance). But this is the clincher - it fits like an XL now. God knows what kind of sizing Paul Smith were using for the factory shirts - I nearly went for a Large, which is what I am in a Marks & Spencer type shirt. All this for a very reasonable price.

Steve Ricks: The man is versatile, thoughtful, very amiable and communicative and above all, his final product is so worth investing in. I can now wear this shirt day to day and not worry about breathing in the whole time. Money well spent.

All I need to do now is find those damn boots...

11 shirt - Paul Smith modifications pt4

I’ve now finished the three main modifications I needed to do no my Paul Smith PS shirt to make it into a Matt Smith shirt: Breast Pocket, Cuffs and Buttonstand.

There is, however, one more modification I am going to make, which may not be strictly screen-accurate – but it’s for my own personal comfort!

The Paul Smith PS shirt is very tailored, in that it is very fitted and quite tight around the middle, being intended for a considerably slimmer frame than most normal body sizes.
The shirt I bought was an XXL, which for me is ludicrous, as I normally wear a simple L. As a result, the sleeves are bordering on being too long and the collar is slightly too big for my neck, BUT the body of the shirt is tight around me.

Having studied the shirt carefully, I realize there is an easy way that I can make it fit better. The back of the shirt has a dart on either side, taking in around and inch each side (see above).

Notice how the shirt is quite taught around my tailor’s dummy.

Because the shirt isn’t lined, these darts are simply sewn and the fabric is not cut in any way, so I can carefully unpick them and press them flat.
There will be a little scarring where the stitching was, but this will be in the back and will hopefully get lost in the pattern of the fabric anyway.

Furthermore, the centre of the back has a double-pleat, as do most dress shirts. However, a conventional shirt has just the tops of these pleats sewn at the yolk-line, allowing the folds to drop out within a few inches. The Paul Smith PS shirt does this a little differently, with a line of stitching running the full length down the back to keep the pleat sharp to the hem. My plan is to unpick this as well and re-sew the hem opened out, giving a further inch and a half across the back.

This will give me a grand total of an extra 3.5 inches across the width of the back!

The fabric is very thin and delicate, so the un-picking has to be done with care. All goes well and after doing all I intended I find the back has become a lot more loose as required.

All I then need to do is re-hem the bottom where I have released the centre back pleat (see left).

So finally I have done all the modification I wanted to do and have a shirt ready to wear  – with comfort!

You can see in the picture (see right) how loose the back now is compared to the BEFORE picture at the top of this posting (shown again, below).








So at last I now have my fully modified shirt ready to wear!
below is the burgundy version for myself.


And here is the blue version for my friend.
Look out for his Review of his shirt in a future posting.

Kamis, 25 Februari 2010

11 shirt - Paul Smith modifications pt3

Today I tackled the buttonstand on the Paul Smith PS shirt, and found sometimes things are easy, and sometimes they are not!

The shirt Matt Smith wears, although it is a Paul Smith PS shirt, has visible buttons when it is worn (see right).
Studying the pictures, the buttonstand needs to be a full three columns of squiggles wide, lined up accurately on either edge (see right, inset). So I need to bear this in mind when I am reworking the fabric available.

The original shirt has a concealed buttonstand, making a very clean line (see left).

Sometimes these concealed stands are tacked halfway between the holes to help keep it in place, but thankfully this shirt does not have that, which should make things a little easier.

This is very simply created with a single line of stitch which basically forks the shirt front into two equal width fold: the lower has the buttonholes; the upper hides them from view.

The best way to show how the fabric is folded and sewn is in this diagram (see left).

I have a couple of shirts to do modifications on, one for myself and a couple for friends. Mine is a XXL shirt, and both of my friends’ ones are XL in size.

Before starting work I need to take a little time to look the shirts over and asses what to do and the current structure of the shirt.
To my surprise I noticed something curious, and a little annoying!

My XXL shirt has the buttonstand’s edge lining up with the edge of the column (just the way is needs to be) (see right), but both the XL sizes has it breaking a column in half (see far right).
This makes my work a little harder, since it means I cannot use the existing buttonholes for the XL size, and my approach for each will be very different.

Either-way, I need to unpick the existing placket to see what I have to work with. There is a single line of stitch which makes this, and I need to release the top and bottom so I can press it out flat (see left).

Now what I do depends on how the shirt was originally made.

Buttonstand for XL
Both the XL shirts I have have the pattern falling in exactly the same place, with the edge of the existing buttonstand cutting a column of squiggles in half. This renders the existing buttonholes useless to me.

I therefore have to cut them clean off, which I do as close to the holes as I can (see right).

I then press everything out flat and see where the column of squiggles line up with the front of the collar stand, as this will determine where I start from. I can then press the left edge of the new buttonstand and the width of it to three columns wide.

All I then need to do is pleat what is left to create an edge between the new buttonstand and the shirt front.

It was difficult to show this in photos, but I have done another diagram to show what I mean (see above). This is what I am aiming to achieve for both sizes of shirts.

I then had to re-sew the buttonholes through the new stand I had created (see right). I kept the discarded strip of original buttonholes and use this as a position guide.
For my own reference my settings on my buttonholer were:
 Length=halfway Bight=H Space=A.

The finished result came out pretty well (see left).


I am very pleased that the front edge of the buttonstand lines up perfectly with the collar stand.

The second XL shirt I had to do modifications to was the alternative blue version, which Matt Smith has been seen wearing in some of the later episodes, as well as the new series teaser trailer.

Buttonstand for XXL
The XXL shirt has the existing buttons in the right position, so this one is a little easier to do.

Again I unpick the existing buttonstand and open it out to reveal as much fabric as possible, which I then press out flat.

I then fold and press the edges of the new buttonstand to three columns of pattern, with the existing buttonholes in the centre.

It is then a relatively simple process to re-pleate the rest of the edge to create position the new buttonstand in the correct place, following the above diagram as closely as I can. This is stitched through all layers to the front (see right).

It does, however, finish with the edge just short of the collar stand (see left), but this isn’t visible when the shirt is buttoned up.

Jumat, 05 Februari 2010

PostScript to PS Shirt

A little while ago I had a tip-off from one of my readers.
He sent me a link to a website called tobi.com selling designer clothing, including a range of Paul Smith garments.

What he had spotted was the Paul Smith PS shirt as worn by Matt Smith – but not a version that had been seen so far (see below).


The only colourway available was the blue, with no sign of a burgundy option. When I looked at the site there was a S and a L option available with a drop down to chose how many, though only 1 was given.

I choose the L and made a purchase. When I returned to the page, the L option had gone, so I guess I grabbed the last one!
Within 24 hours I received an email saying it had been dispatched, and within the week it arrived by UPS courier (with an import duty charge, darn!)


This new look Paul Smith PS shirt has some design points to differentiate it from the previous version.

  • There is no breast pocket
  • The sleeves do not have straps
  • The buttonstand is constructed differently, with large wide fold-backs half lining the fronts
  • The cuffs are entirely made form the striped sleeve strap fabric
  • The hem of the shirt is tailed rather than straight
  • There is a small embroidered PS logo on one of the cuff plackets

For me though, the major difference to this shirt is the fitting.

When I ordered my existing shirt I have, sourced from John-Anthony.com, I chose a Large. They called me to let me know it was out of stock, so I settled on an XL instead. To my surprise it was too small for me, and I later had to acquired an XXL from eBay, which is a passable fit. Since letting out the back, it is much more comfortable.
This new shirt, by comparison, is straight off a good fit, and is just a Large. The whole cut is better.

This new shirt, however, despite being just a Large, is a very good fit, with a decent amount of room in it. This bares up the Fits true to size comment on the website listing.

Lastly, I was most amused to notice the footnote in the listing that states the model, Matt, is wearing a size large.

I wonder if they mean Matt Smith?

Selasa, 02 Februari 2010

11 shirt - Paul Smith modifications pt2

After spending some time removing the breast pocket and the sleeve straps, I am now ready to start doing some sewing and sort out the cuffs.

Luckily the first image of Matt in costume (see left) was of very high resolution and it’s possible to see a lot of detail around the cuff (see below).



The fabric I have harvested from deconstructing the sleeve straps, although fairly substantial (see below, left), is not in a single piece long enough to run the circumference of the cuff, falling short by some four inches. I will therefore need to splice the fabric down the centre (see below, centre) and create a longer strip (see below, right).




Because of the depth of the strip, I firstly need to remove one of the cuff buttons as I need to sew real close to where it sits. I will put it back later.

I then attach the strip to the inside of the cuff, with the strip face up (see right). I only sew along the long edge of the cuff, as close to the edge as I can.


The strip then gets flapped around to the outside, binding the edge.

I then fold and press the ends to line up with the ends of the cuff (see left) and similarly fold and press what will form the bottom edge of the stripes.



It is then a fairly simple task to top-stitch the stripes down onto the outside of the cuff (see right).
This picture also shows the remaining button on the cuff, the temporally removed button belongs on the bottom edge of the stripes.



My only problem was avoiding the buttonhole on the other end of the cuff (see left). I don’t want to cover it over, as setting a new one over the top would not be a good idea. I suspect the BBC Costume Department also avoided this in a similar way.

And that is my cuffs sorted (see below).


Next will be the dreaded button-stand . . . .

Rabu, 13 Januari 2010

11 Shirt - pattern repeat

I mentioned in my previous post that as well as modifying my own Paul Smith PS shirt, I have also been looking into making reproductions of the Matt Smith shirt for those who missed out on the opportunity to grab one when they were available.

I explained how I had been working on replicating the fabric design using Spoonflower, but quickly skipped to the end so I could show the swatch samples I had created for anyone interested.

I promised to write about how I had gotten to that point, and here it is.

After the success of the Seven Hatband Hankies, I knew it was entirely possible to scan existing fabric and recreate it using the likes of Spoonflower. As I wrote in the Seven Costume Blog, the hankies had their own challenge, not helped by the original being distorted and twisted out of true when it was scanned. However, patching it together was highly successful, when I had worked out the right technique.

For the Matt Smith shirt, I started by doing a good quality high resolution scan of the front of the shirt, making sure to keep the fabric as flat and taught as possible (see left).

When opened in Photoshop I made sure it was accurately square and rotated it as needed.

Despite the apparent randomness of the design, there must be an established pattern repeat in the fabric. The question was to find it.

I picked on a squiggle that was distinctive, and copied an area around it; pasted it back on top, and made it transparent; I could then slide it up and down the fabric until it phased with its repeat above and below.
This gave me horizontal guides for the repeat.

I did the same for sideways and found the repeat in that direction. I then placed guides here too, isolating the area of the repeat (see right).
I allowed myself some overlap to remain which I will fade out so the joins won’t show, but then deleted the rest of the  scanned image.


Next was to check the repeat was working, so I copied the area inside the guides and replicated it surrounding the image, creating my own repeat. (see left).

At this point it was critical to correct any discrepancy of alignment or repeat. I spent some time until I was happy.

The scan I had been working with included the background colour of the design and showed the weave of the fabric itself. I retouched the isolated repeat to eliminate this, before reducing it to a simple black and white high contrast linework image.
I have done it this way so that I can apply a consistent colour across the design.

Before applying the colour, I built a three-by-three grid which ‘proves’ the repeat (see right), ready to step-and-repeat it enough times to cover my entire fabric.

Usually you would only need to provide the isolated area to Spoonflower to do the step-and-repeat online, however, I have a clever little trick planned, so I need to produce a single image to cover the entire area of the print run.

Having done all the careful preparation, this was a relatively simple process and I soon had a three-yard length of pattern repeat ready for the next step (see left).

In the meantime though, I had some space on the side of a reprint of the Seven Hankies, so I added some swatch samples, which I have made available for sale (see below).
If you would like a Eleven Shirt fabric swatch, please PayPal US$20 to tennantcoat@me.com, remembering to include your postal address and a note that you want the swatch.
Look out for the next stage of my process to replicate the shirt.


Minggu, 03 Januari 2010

11 shirt - Paul Smith modifications pt1




Today I start work doing the modifications needed to make my Paul Smith PS shirt (see right) as screen accurate as possible.

I manages to get hold of one that fits – which is a bonus!


There are three modifications to make to get the shirt looking right:
Breast pocket – The Paul Smith shirt has a breast pocket, which is not present on the Matt Smith shirt.
Cuffs – The Matt Smith shirt has a couple of bold burgundy stripes around the cuffs, which are not on the Paul Smith shirt.
Button stand – The Paul Smith shirt has a flap, concealing the buttons from view when it is worn, but on the Matt Smith shirt they are clearly visible.
I am working on the basis that no-one has a Paul Smith PS shirt for themselves, so I intend to go through these three modifications in as much detail as space permits, which may make them a little patronising. Sorry for this in advance, but I thought it worth covering it all.

The first modification I need to make is real simple: the Paul Smith PS shirt has a breast pocket, which is not present on the version Matt Smith wears.


I need to very carefully unpick the stitching around the pocket (see above) and remove it in one piece (see left).

This gives me a nice fabric swatch sample to use. I have also retained the cotton I removed, as I will need to get a colour reference for sewing later.

While I am in an unpicking mode, I now prepare for the next modification, which is on the cuffs.

In the first publicity still which emerged of Matt Smith in costume (see right), it is possible to see the cuffs of his shirt.
Curiously these are different from the Paul Smith PS shirt, in that they have two rings of burgundy stripes around them (see right, insert).
In fact, if you look very closely you may also be able to see that the wiggly line between the stripes does not seem to be as red as the rest of the shirt, instead looking quite dark, almost black.

Once I got my Paul Smith PS shirt, the mystery of the cuffs was solved.

The sleeves have a button on the outside of the upper arm (see left, left), and attached inside is a strap. This strap buttons around the sleeve, keeping them up like a short-sleeved shirt.

The straps have burgundy stripes with dark blue wiggly lines between them – a perfect match to the cuffs! (see left, right)

So what I need to do now is very carefully remove the straps from insdie the sleeves (see below, top left & right); I then equally carefully unpick the straps themselves to find that they are folded twice over before being stitched (see below, bottom left), making for quite a wide piece of fabric (see below, bottom right)


Now that I have extracted the straps and opened them out flat, I can see the dark wiggly lines (as opposed to the burgundy colour of the rest of the shirt) and the stripes themselves (see below).


I need to press the fabric nice and flat and plan how I am going to attach them to the cuffs. Presenting the fabric to the cuffs I can immediately see some issues that need to be sorted out.
Firstly the fabric is not as long as the cuff, falling short by a good four inches. Luckily the fabric is wide enough to cut in half and join into a longer length.
Then, when it is attached, I need to be aware of the buttonholes on the cuffs and need to avoid covering them.

Once I have planned it out, I’ll be back to sew them in place.
Check back soon to follow how I get on.